![]() |
|
#1
|
|||
|
|||
![]()
Hey folks, Can anyone tell me how the glass roofs are fitted, Can the glass panel be put into a VT or is the roof structure different.
My roof has some annoying rust, but its only in the middle. I can get a glass roof for a good price but would it be a nightmare??? Any help would be great thanks [^] |
#2
|
|||
|
|||
![]()
You talking about replacing the Glass in the Glassroof or fitting an Actual Glassroof to a tin Top?
If it's the latter don't bother - complete nightmare unless you pay a pro big money and then still you're weakening the structure of the car.
__________________
Ronan siR [New addition] Sold! siR [RIP] |
#3
|
|||
|
|||
![]()
Yeah i was talking about the latter.
I was hoping it was just a case of cutting a large section of the roof and bonding in the glass roof |
#4
|
|||
|
|||
![]()
Unfortunately no, you'd need to cut it from the Pillars.
The Glassroof has a slightly bigger thickness of tin where the Glassroof resides and then you'd need the roof lining etc. For 1 you'd weaken the life out of the structure. It'd never look right imo. I've seen pics of it done from the Pillars or a Glassroof replaced where one was broken/cracked but never just retro-fitted in there!
__________________
Ronan siR [New addition] Sold! siR [RIP] |
#5
|
|||
|
|||
![]()
Cheers mate, i was thinking it wasn't straight forward cause i haven't heard of anyone doing it.
Too much work for my liking. Do u know if aftermarket replacement roof skins are available? |
#6
|
|||
|
|||
![]()
My advice is check over on the yanks forums.A lot have cut and fit just to make the car more JDM.Ya might find a write up somewhere.
If not,how bad is the rust?sand it down and respray may be best.
__________________
C=R=X |
#7
|
|||
|
|||
![]()
The rust is only minor but the steel is very weak, I've replaced roof skins on eg civics before without any problems (one of my mates is gifted with a tig welder) but eg civic parts are a lot more common and usually cheap
|
#8
|
|||
|
|||
![]()
if you are good at drilling out spot welds and doing them again you will do it as long as you are neat and tidy. And if you can get the glass out in the first place.
Guy over on honda-tech has done it, cant rem the name off hand sorry.
__________________
89 Black JDM CR-X Si (You might call it a project) 91 Gunmetal Grey UKDM CR-X 16v 98 Passion Orange UKDM Civic VTi MB6 90 White USDM CRX HF (JDM B20B Swap) 05 White USDM Subaru Legacy Outback |
#9
|
|||
|
|||
![]()
you should register with http://www.cr-xcentral.com/forums/index.php, as they have several Glass roof conversion guides.
I've done it on mine [8D]
__________________
<b><font size=\"1\"><font color=\"black\">\'90 CRX VT + </font id=\"black\"><font color=\"orange\">Exclusive Interior</font id=\"orange\"></font id=\"size1\"></b> |
#10
|
|||
|
|||
![]()
Hi Hadtstec , welcome aboard [:X]
BRIAN
__________________
i will finish this car , eventually . |
![]() |
Thread Tools | |
Display Modes | |
|
|