|
|
#1
02-28-2012, 04:27 PM
|
|||
|
|||
running on 3 cylinders
can anybody help !!!
i have a 1991 crx d16a9 its been lying up since november and i started it today and noticed it was only running on 3 cylinders... does any 1 know what could be the cause of this..thanks [xx(] 
|
|
#2
02-28-2012, 08:49 PM
|
|||
|
|||
|
Try giving the spark plugs a clean with a wire brush or even replace for new ones. Might be a one of the spark plug leads also. Just try these steps first as its fairly inexpensive.
__________________
1990 CRX 16v 1.6i - SOLD  1992 CRX SiR glassroof shell 1991 Crx SiR
|
|
#3
02-28-2012, 09:18 PM
|
|||
|
|||
|
Have you checked anything on it?
Try changing the plug from one of the other cylinders to the one that isn't firing. Could be a lead problem or distributor. If the plug isn't wet then its a fuel problem check the injector and injector wiring
__________________
Paul 91 Torino Red EF8 90 Torino Red EF6
|
|
#4
03-02-2012, 12:31 AM
|
|||
|
|||
|
thanks lads i solved the problem[8]
one of the spark plugs were loose and it was black and dirty so i just gave it a quick clean untill i buy new plugs[^]... does any body no when or were the next meet up will be???
|
|
#6
03-02-2012, 10:26 AM
|
|||
|
|||
|
Hope to get a meet going for April or may. Did I send you the CRX.org stickers that time? If not send on your address and ill send ya on one
__________________
Paul 91 Torino Red EF8 90 Torino Red EF6
|
 |
|
|
Linear Mode
