|
|
#1
11-11-2010, 04:25 PM
|
|||
|
|||
si to vtec conversion
i have a crx si and i'm thinking of buying a crashed ee8/ef8 and doin the conversion my self. i'm just wondering has anybody got any good links for the conversion?
i've never done anything like this so i'd say i'll need a fairly good walk threw. would there be alot of unbolting from one car and re ataching to the other? or is there any custom work involved? 
|
|
#2
11-11-2010, 10:00 PM
|
|||
|
|||
|
your going from a d series to a b series, so you will have to weld in engine mounts. Its not going to be a bolt in job at all. If you spend a few hundred fettling the d16 engine you have, you can seriously improve the performance, and do most of the work yourself. D16 is a mighty engine in its own right, although ive never driven an si
__________________
-james d15b 1.5x JDM
|
|
#3
11-11-2010, 11:40 PM
|
|||
|
|||
|
i'm not really bothered tuning the d16. i'm planning on running a b18 in the crx and i have a ys1 gearbox there too so i'll be able to use a 4.9 fd in it.
i found two great links i'll post them up. still debating on weather on not to do it myself tbh
|
|
#4
11-11-2010, 11:59 PM
|
|||
|
|||
|
Ya will need to weld in one mount. The gearbox one.
Ya will need drive shaft's from you b series engine's source. Wiring is straight forward enough from an si to vtec. I've done a few of these conversion's, made loom's, etc. Your as well of to convert it to obd1. Programmable ecu's are going cheap including a map these day's. Less than 500euro. A b18 would be obd1 at least, anyway.
__________________
0851655770 For all your Honda problems
|
 |
|
|
Linear Mode
